Vanquish Products has New Parts for the Axial Yeti

Vanquish Products has new parts for the Axial Yeti.  Pictured above is the Titanium Front Link Kit (part#VPS07200). 

Product description:

• Includes all that is needed to replace the 2 plastic upper front suspension units and the 2 steering units that connect the steering rack to the knuckles
• Made from high grade titanium to maintain an ultra light weight, while adding extra stiffness 

Includes the following:

• 4pcs 62mm Titanium Links
• 8pcs Rod Ends with Steel Hollow Balls

 Next is the Titanium Rear Upper Suspension Link Kit (part#VPS07201).

Product description:

• Includes all that is needed to replace the 2 plastic rear upper suspension links on the Axial Yeti
• Made from high grade titanium to maintain an ultra light weight, while adding extra stiffness

Includes the following:

• 2pcs 124mm Titanium Links
• 4pcs Rod Ends with Steel Hollow Balls

Last is the Double Sheer Steering Rack Kit (part#VPS07230).

Product description:

• Includes all that is needed to replace the 2 plastic steering rack pins and 4 steering rack bushings
• Removes a lot of the wiggle from the plastic stock pieces and replaces them with tight tolerance pins and bearings

Includes the following:

• 2pcs Aluminum Double Sheer Steering Rack Pins
• 4pcs 8mm x 5mm x 2.5mm Bearings

Vanquish Products has New 12mm Clamping Hex Hubs for the Axial SCX10 and Wraith

Vanquish Products has new 12mm Clamping Hex Hubs for the Axial SCX10 and Wraith.  The 12mm clamping hex hubs are sold in pairs and are available in three colors: Silver (part#VPS07080), Grey (part#VPS07081), and Black (part#VPS07082).

Vanquish Products 6061-T6 aluminum 12mm hex hub

Clamping hex helps alleviate pin breakage, when stub shafts rotate and hex does not

Tighter tolerances for better stub shaft fitment

Includes 2pcs: Vanquish Products 12mm hex hubs, 2pcs 2-56 SHCS screws

Vanquish Products has New Poison Spyder Brawler Rockers

Vanquish Products had new Poison Spyder Brawler Rockers for the Axial SCX10.  They are available on three colors: Black (part#VPS07093), Grey (part#VPS07092), and Silver (part#VPS07091).

Product Details:

Officially licensed Poison Spyder Brawler Rockers™

The ultimate scale slider.

Created with body protection and aesthetics in mind

Comes with side angled skid plates, which helps raise ground clearance at the sliders and helps eliminate getting stuck from foreign objects between the side rail mounts

Comes with body tabs that pinch the body between the slider and the tabs, eliminating bodies being folded in from rocks

Reduces amount of body movement, providing a more scale and realistic trail ride

Provides maximum in scale realism

Details have been machined to be a scale copy of the 1:1 Poison Spyder Rocker Knocker™

Includes the Following:

2pcs 6061-T6 sets, left and right sliders with vertical body armor inserts

4pcs 6061-T6 redesigned angled frame rail supports

12pcs 6061-T6 body tabs

2pcs Delrin skids plates for frame rail supports

18pcs M3x0.5 10mm SHCS

4pcs M3x0.5 10mm SHCS

22pcs 2-56 3/32 SSS

8pcs M3x0.5 6mm FHCS

1pc 0.035 allen wrench

1pc Instructions

Vanquish Products has New Limiting Straps and Tow Straps for the Axial SCX10 and Wraith

Vanquish Products has new Limiting Straps and Tow Straps for the Axial SCX10 and Wraith.  Pictured above is the Limiting Straps for the SCX10.  The straps attach to the shocks and keeps them from over extending.  It gives the SCX10 a scale appearance just like the real one's on the full size 1:1 vehicles.  

The straps are sold in pairs and are available in six colors:
VPS07040 Yellow
VPS07041 Green
VPS07042 Orange
VPS07043 Red
VPS07044 Blue
VPS07045 Black

Pictured above are the Limiting Straps for the Axial Wraith.  They are the same as described above for the SCX10, but the straps are longer to fit the Wraith. 

The straps are sold in pairs and are available in six colors:
VPS07050 Yellow
VPS07051 Green
VPS07052 Orange
VPS07053 Red
VPS07054 Blue
VPS07055 Black

Pictured above is the Tow Strap 17" Yellow (VPS07060).  The tow straps are great to give your scale vehicle a realistic look while towing another vehicle.

Vanquish Products has New VVD's with 5mm Stubs for the Axial Wraith (VPS07030) and SCX10 (VPS07031)

Vanquish Products has their new VVD Version #2 with 5mm Stubs for the Axial Wraith and SCX10.  The version #2 VVD's are stronger than the original VVD's but they may require drilling out the 12mm hexes to put the VVD's on the vehicle.  Pictured above is the new VVD Version #2 with 5mm Stubs for the Axial Wraith (part# VPS07030). 

Product Details

Vanquish VVD version #2

5MM threads on stubs, includes 5MM nyloc nuts.

May require drilling out 12mm hexes to clear the 5mm threads.

Made from highest grade military spec 4340M, Equal strength to 300M.

Comes hand polished and assembled.

Ultra high strength cross pins.

Anodized and laser engraved pin retainer ring

Made in the USA

Twice as strong as stock universals

Heat treated and tempered

50 degree steering angle

Full selection of rebuild parts available.

Design for maximum material between link mount screws some rubbing may occur.

May require slight grinding of screws that hold lower links mounts. Design for maximum material between link mount screws some rubbing may occur. If any rubbing occurs. a very simple slight grinding off of the link mount screw where rubbing of the screw occurs may be required.

replaces ax30780 ax30779

Pictured above is the new VVD Version #2 with 5mm Stubs for the Axial SCX10 (part# VPS07031). 

Product Details

Vanquish VVD version #2

5MM threads on stubs, includes 5MM nyloc nuts.

May require drilling out 12mm hexes to clear the 5mm threads.

works with ax10, scx10, honcho, dingo, vanquish scx axles and vanquish currie scx axles.

Made from highest grade military spec 4340M, Equal strength to 300M.

Comes hand polished and assembled.

Ultra high strength cross pins.

Anodized and laser engraved pin retainer ring

Made in the USA

Twice as strong as stock universals

Heat treated and tempered

50 degree steering angle

Full selection of rebuild parts available.

Design for maximum material between link mount screws some rubbing may occur.

May require slight grinding of screws that hold lower links mounts. Design for maximum material between link mount screws some rubbing may occur. If any rubbing occurs. a very simple slight grinding off of the link mount screw where rubbing of the screw occurs may be required.

replaces ax30420 ax30366 ax30464

Vanquish Products has New Officially Licensed 2.2 Method 105 Wheels

Vanquish Products has new Officially Licensed 2.2 Method 105 Race Wheels.  The Method 105 Race Wheels are available in four different options: Black Wheel/Black Beadlock (VPS07020), Black Wheel/Silver Beadlock (VPS07021), Silver Wheel/Black Beadlock (VPS07022), and Silver Wheel/Silver Beadlock (VPS07023).

Product Description:

Officially Licensed METHOD Race Wheel 105 2.2 Bead lock Wheel By Vanquish Products

Compatible with outer Vanquish OMF 2.2 beadlock rings

Precision CNC Machined from Domestic high grade solid billet aluminum

Based on our popular 2.2 OMF clamp ring bead lock mounting system

Rapid fast tire changes with only 5 screws.

Light weight and strong durability design.

Hard anodized.

Grade 5 Stainless Steel hardware.

High clearance inner wheel well.

Choose multiple offsets to adjust track width Vanquish Products patented wheel hub system.

These are a 1.0 wide wheel.

Exact as possible scale replica of the full size Method 105 Race Wheel.

Laser engraved Method logo on wheel face

Price includes the following.

2ea. Method 105 2.2 RC Bead lock Wheels.

2ea. Aluminum rear bead lock rings.

2ea. Aluminum Internal clamping ring.

2ea. Outside Black Beadlock ring 74 pcs 1-64 SHCS 21 pcs 4-40 SHCS

Vanquish Products has Offically Licensed 2.2 KMC XD775 ROCKSTAR Wheels (VPS07035)

Vanquish Products had offically licensed 2.2 KMC XD775 ROCKSTAR wheels (part# VPS07035).

PRODUCT DETAILS

Made from solid 6061 USA made aluminum

Includes the following.

2 wheels (.800 inches wide)Hard black anodized and laser engraved

2 aluminum internal bead retainer rings that incorporate a air relief channel. Allows free flowing air to escape the wheel if it is drilled to allow venting.

2 rear mounted beadlock rings

All hardware for beadlock rings, and hubs.

includes 2 extra long screws to start the mounting process, then replace with short screws.

Each wheel weights in at 1.9 oz including all hardware

Be sure to order slw style hubs to fit to your 12mm wheel hex.

New design works with 225 hubs.

** does not include slw style hex hubs **

Vanquish Products has New Scale Knuckles and C-Hubs for the Axial Wraith

Vanquish Products has new scale knuckles and c-hubs for the Axial Wraith.  Pictured above is the Wraith Scale Knuckle.  The new scale knuckles are available in three colors: Silver (part# VPS07001), Gun Metal (VPS07002), and Black (VPS07003). 

Product discription:

Vanquish Products Wraith Scale Knuckles.

3d cnc machined to look like a popular 1:1 race knuckle.

Double shear steering arms.

When using vanquish scale chubs and knuckles, adds a bumpstop at 48 degree's to protect cvd's or VVD'S from damage.

1/3 weight reduction from stock VP wraith Knuckles.

Works with vanquish wraith titanium tie rod VPS03110. will require unscrewing rod end 1 to 2 turns, revised tie rod coming soon.

Works With Standard Axial Stock and Vanquish Wraith chubs.

3d machined Simulated welds.

Next is the new Wraith Scale C-Hubs.  The scale c-hubs are available in three colors: Silver (Part# VPS07011), Gun Metal (VPS07012), and Black (VPS07013).

Products discription:

Vanquish Products Wraith Scale Chubs.

3d cnc machined to look like a popular 1:1 race Chubs.

Clamping chub for extra holding power and zero slop.

When using vanquish scale chubs and knuckles, adds a bumpstop at 48 degree's to protect cvd's or VVD'S from damage.

Works With Standard Axial Stock and Vanquish Wraith knuckles.

3d machined Simulated welds.

Vanquish Products has New Parts for the Vaterra Twin Hammers

Vanquish Products has two new parts for the Vaterra Twin Hammers.  First is the Front Spindles/Steering Knuckles.  They are available in two colors: Black (part# VPS06951) and Silver (part# VPS06950). 

PRODUCT DETAILS

Vaterra Twin Hammers HD Front Spindles by Vanquish Products.

Made from Highest Grade domestic made 6061-T6 For durability and strength

Unique Design allows ultra light weight performance.

Interchangeable steering arms For zero ackermann Steering geometry.

Zero Ackerman steering arms available soon.

Increased size 11 mm exterior Bearing for extra heavy duty performance.

Dust Finished and hard anodized for lustrous lasting looks and wear resistance. 

Next is the Castor Blocks.  They are also available in Black (part# VPS06956) and Silver (part# VPS06955). 

PRODUCT DETAILS

Vaterra Twin Hammers HD 15 degree Front Caster Block Set by Vanquish Products.

Made from Highest Grade domestic made 6061-T6 For durability and strength

Unique Design allows ultra light weight performance.

Dust Finished and hard anodized for lustrous lasting looks and wear resistance.

New STRC Parts for the Axial SCX10

STRC has released several new parts for the Axial SCX10.  Pictured is the Steering Upgrade Kit (part# STA30516).  Take unwanted flex and sloppy steering out of your SCX10's plastic steering links with the precision aluminum steering upgrade kit.  Comes complete with the following:

- CNC Machined Aluminum Long Steering Link x1
- CNC Machined Aluminum Short Steering Link x1
- CNC Machined Aluminum 2mm spacer x1
- M3x25mm Button Head Screw x1
- M3x16mm Set-Screws x4
- M3 Lock-nut x1

Requires Axial AX80005 Rod Ends and Axial AX80018 Rod End Links to complete.

Next is the Front And Lower Suspension Links (part# STA30518).  Take away unwanted suspension links flexing of your SCX10 (below) with the CNC machined aluminum suspension links.  This upgrade kit includes:

- 1 pair of CNC Machined Aluminum Rear Links
- 1 pair of CNC Machined Aluminum Front Links
- M3x16mm set-screw (8 pcs)

Requires Axial Rod Ends (AX80005 x2) and Axial Rod End Links (AX80018).

 

Next is the Front Shock Tower (part# STA80025F).  Add great looks and increase durability for your SCX10 with our CNC Machined Aluminum Front Shock Towers.  All hardware included.  Sold in pairs.  There is also a Rear Shock Tower (Not Pictured) (part# STA80025F).

Next is the Chassis Center "H" Brace (part# STA80026H).  Increase the strength of your SCX10's chassis and prevent it from twisting on that tough trail with this heavy duty CNC Machined aluminum Center "H" Brace.  Featuring all the same geometry as the stock pieces, this brace also adds awesome great looks to your SCX10 chassis.

Next is the Upper Link Mount (part# STA80043).   This CNC Machined heavy duty aluminum rear upper link mount provides a solid foundation for the rear upper suspension links.  Features four holes for
installation on the rear axle and beautifully machined to add great looks to your SCX10.  All hardware included.

The last Picture is the Front And Rear Upper Suspension Link Kit (part# STA80043U).  Replace the flexing/twising upper suspension link with stronger/more durable and realistic looking CNC Machined Aluminum suspension link.  This upper suspension kit include:

- CNC Machined "Y" link (STA80015-1)  x1
- CNC Machined 15mm threaded link x1
- CNC Machined 55mm link x2
- CNC Machined Rear upper straight links x2
- M3x28mm button head screw x1
- Mx16mm set-screws x8

Requires Axial Rod Ends (AX80005 x2) and Axial Rod End links (AX80018).

All of the parts shown are available is four different colors: Black, Green, Gun Metal, and Silver.

New Aluminum Bumpers from STRC for the Axial SCX10 Rubicon and G6

STRC has new Aluminum Bumpers for the Axial SCX10 Rubicon and G6 models only.  The top picture is the Front Bumper Mount (part# STA80125F).  The bottom picture is the Rear Bumper Mount (part# STA80125R).  Both bumpers are available in four different colors: Black, Green, Gun Metal, and Silver.