Contact Information

SK Motion
Walnut, California
Tel: (949) 705-6668
Email: sales@skmotion.com
Web:www.skmotion.com

Friday, December 13, 2013

Vanquish Products has a New Titanium 8pc. Link Kit for the Axial SCX10 G6 (VPS06975)

Vanquish Products has a new Titanium 8pc. Link Kit for the Axial SCX10 G6 (part# VPS06975).  The Axial SCX10 G6 has a 12 inch wheel base and this new Titanium 8pc. Link Kit is designed to fit it.   Most of the other SCX10 kits from Axial have a 12.3 inch wheel base.

Product details:

  • Vanquish Products Titanium 8 pc link kit for Axial SCX G6 with 12.0 Wheel Base.
  • Designed to fit fully stock Axial Racing SCX G6 with stock axles.
  • Includes the following
  • 4 upper links
  • 4 lower links
  • 16 Revo rod ends and ball swivels.
  • Instruction sheet with parts description.
  • Thursday, December 12, 2013

    Vanquish Products has New Parts for the Axial SCX / JK 4 Link Conversion Kit with Stock Axles.

    Vanquish Products has a New SCX/JK 4 Link Conversion Kit for the Stock Plastic Axles for the Axial SCX10 (part# VPS06970).

    Product Details:

  • Vanquish Products Aluminum 4 Link SCX Kit.
  • Precision CNC machined from solid billet aluminum.
  • Fits all stock Axial SCX10 with 12.3 wheel Base
  • Allows stock front axle servo plate to remain without obstruction.
  • Replaces The stock plastic 3 link with true 4 link suspension.
  • Includes the following.
  • 1ea. Vanquish front 4 link mount.
  • hardware to mount 4 link mount.
  • 2 ea. upper front titanium links and rod ends.
  • 2 ea. lower front titanium links and rod ends.
  • 2 ea. upper rear titanium links and rod ends.
  • 2 ea. lower rear front titanium links and rod ends.
  • Wednesday, December 11, 2013

    Vanquish Products has a new 3 Link / CMS / Panhard Conversion Kit for the Axial SCX10 with Stock 12.3 WB

    Vanquish Products has a new 3 Link / CMS / Panhard Conversion Kit for the Axial SCX10 with Stock 12.3" wheel base.  The kit is available in two colors: Black (VPS06973) and Silver (VPS06972). 

    The kit comes with the following:
  • CMS Chassis Mounted Servo Bracket
  • Pan hard Bracket and pan hard bar.
  • Full 10 PC Titanium Link kit with steering tie rod and drag link.
  • Hardware
  • Rod Ends.
  • Instructions
  • Tuesday, December 3, 2013

    SK Motion is Now Distributing RC4WD Parts, Tires, and Kits





    SK Motion is now distributing RC4WD products.  RC4WD has a large selection of scale RC parts and tires.  They carry scale accessories from Jack Stands, Tow Shackles, Winches (all pictured above); and also scale Metal Bumpers, Two Speed Transmissions for the SCX10 and more that are not shown.  RC4WD has a large selection of 1.9 and 2.2 Scale Tires available.  They also make a very scale looking kit, called the Gelande II Truck (pictured above).

    Wednesday, October 16, 2013

    Axial has New Officially Licensed 2.2 Maxxis Trepador Tires (AX12022)

    Axial has new officially licensed 2.2 Maxxis Trepador Tires (part#AX12022).

    The Maxxis Trepador tires are replicated in 1:10 scale, ready to mount on your 2.2 wheels. These fully licensed tires are molded in performance proven R35 compound for the best grip on any off-road surface. The aggressive tread pattern provides excellent traction on mud, rock, sand and everything in between, just like their 1:1 counterpart. These tires also feature a multi-stage staggered shoulder pattern providing improved control, even in the most difficult off-road terrain.

    • Officially licensed by Maxxis
    • 2.2" x 5.5" (56mm x 140mm), 2.05" width (52mm)
    • Fits all 2.2 wheels
    • Directional tread pattern
    • Molded in our sticky R35 rubber compound
    • Foams included
    • Two tires per package

    Tuesday, October 15, 2013

    New Holmes Hobbies TorqueMaster BR Mini Brushed ESC (HHBTMBRMINI)

    Holmes Hobbies has released a new brushed ESC called the TorqueMaster BR Mini (part# HHBTMBRMINI).

    The TorqueMaster BR Mini is the shrunken version of the BR-XL.  No case, no heatsink, and a smaller footprint.  Perfect for weight conscious crawlers, off road trucks, robotics, servomotor and winch use. It has been designed from scratch to meet the rigorous demands of low speed control and high torque density.

    Comes stock with Auto lipo LVC, Full drag brake, instant reverse, and 100% reverse throttle settings.

    1 year warranty
    6v to 25v input, external BEC suggested for all installations.
    30a continuous, 80a burst
    6v 0.5amp linear BEC @ 7.4v input
    28 x 28 x 6mm PCB
    8 grams (without wires)
    Brushed only
    Stick and Castle Link programming compatible

    Reverse and brake adjustment
    Throttle and Brake curve adjustment
    Regenerative Drag Brake
    Active Hold Brake (The Holmes Hold!)
    Quiet mode
     
    Recommended for competitive RC Rock Crawling  and Off Road Truck environtments, and 30a or less robotic use. 

    Tuesday, September 17, 2013

    MIP Hex Driver Set (MIP9502)

    MIP has a Metric Hex Driver Wrench Set (MIP9502).  The set comes with 1.5, 2.0, and 2.5mm hex drivers.  The drivers have a few unique features to them that most of the competition does not have.  The tips are pressed into the handle, so the tips will not come loose.  Also, the handles are made from polycarbonate.  The advantage of these handles are they stay much cooler in the sun and they are much easier on the hands because they do not have the diamond shape grips that aluminum handles tend to have.

    Tuesday, September 10, 2013

    Vanquish Products Method 101 2.2 Wheels




    Vanquish Products has released new officially licensed Method 101 2.2 wheels.  The wheels are available in four colors: Silver with Black Rings (VPS06920), Black with Black Rings (VPS06921), Red with Black Rings (VPS06922), and Green with Black Rings (VPS06923). 

  • Officially Licensed METHOD Race Wheel 101 2.2 Bead lock Wheel By Vanquish Products
  • Compatible with outer Vanquish OMF 2.2 beadlock rings
  • Precision CNC Machined from Domestic high grade solid billet aluminum
  • Based on our popular 2.2 OMF clamp ring bead lock mounting system
  • Rapid fast tire changes with only 5 screws.
  • Light weight and strong durability design.
  • Hard anodized.
  • Grade 5 Stainless Steel hardware.
  • High clearance inner wheel well.
  • Choose multiple offsets to adjust track width Vanquish Products patented wheel hub system.
  • These are a 1.0 wide wheel.
  • Exact as possible scale replica of the full size Method 101 Race Wheel.
  • Laser engraved Method logo on wheel face
  • The wheels includes the following.
  • 2ea. Method 101 2.2 RC Bead lock Wheels.
  • 2ea. Aluminum rear bead lock rings.
  • 2ea. Aluminum Internal clamping ring.
  • 2ea. Outside Black Beadlock ring
  • 74 pcs 1-64 SHCS
  • 21 pcs 4-40 SHCS
  • SLW Hubs are not included.

  • Thursday, September 5, 2013

    Vanquish Products New Servo Mount and Clamp for the Axial SCX10 and Wraith


    Vanquish Products released a new Servo Mount (top picture), and a new Servo Clamp (bottom picture) for the Axial SCX10 or Wraith.  The Servo Mount and Clamp come in two colors: Black and Silver.  Part numbers for the Servo Mount are: Black (VPS06931) and Silver (VPS06930).  Part number for the Servo Clamp are: Black (VPS06933) and Silver (VPS06932).

    Wednesday, August 28, 2013

    1.9 Maxxis Trepador Tires From Axial (AX12019)

    Axial has released officially licensed 1.9 Maxxis Trepador Tires (AX12019).  The tires come in Axial's R35 rubber compound.  The aggressive tread pattern provides excellent traction on mud, rock, sand and everything in between, just like their 1:1 counterpart. These tires also feature a multi-stage staggered shoulder pattern providing improved control, even in the most difficult off-road terrain.

    Friday, August 16, 2013

    Vanquish Products Trailing Arms for the Vaterra Twin Hammer

    Vanquish Products released Trailing Arms for the Vaterra Twin Hammer.  They are available in two colors: Black (VPS06906) and Silver (VPS06907).  Listed are a few features of the Trailing Arms.

  • Made for a replacement of stock trailing arms.
  • Precision 3D CNC Machined From High Grade Aluminum.
  • Unique adjustable tension Ball End Retainers.
  • True Scale Look with miniature scale weld on the fish-plate reinforcements.
  • Ability to mount double shocks or relocate a single shock.Shock mounting holes are below the (theoretical) line between the two ball joint to help prevent the arms from flopping around side to side.

  • Thursday, August 15, 2013

    Looking for Scale Accessories for your Scale RC Truck? Pro-line has Three New Scale Accessory Kits.


    Pro-Line had three new scale accessory kits.  Top Picture is the Scale Accessory #8 (part# 6105-00).  The kit comes with a Race Style Fuel Cell, Nitro Bottle with mounting bracket, Dual Fuel Pumps, Fuel Pressure Regulator and bulk flexible fuel line.

    The middle picture is the Scale Accessory #9 (part# 6106-00).  The kit comes with a Portable Gas grill with removable lid and grate, a Propane bottle, Mini Keg, and Flexible Gas line.

    The bottom picture is the Scale Accessory #10 (part# 6107-00).  The kit comes with a Realistic looking Short and Long Drive Shafts, 2x Axles, Air Locker with Ring Gear Detail, Pinion Gear and a Portable Air Compressor.

    Wednesday, August 14, 2013

    Axial has Steel Gears to Beef Up the Transmission in the SCX10 and Wraith (AX30708)

    If you are tired of replacing the plastic gears in the transmission in the Axial SCX10 and/or Wraith, Axial released new Steel Gears (AX30708) for the transmission.   The Steel Gears come as a set of three and are more durable than the plastic gears.  The steel gears are perfect for people using large brushless motors and/or three or four cell LiPo's. 

    Wednesday, August 7, 2013

    Tired of Breaking Center Drive Shafts for the Axial SCX10 or Wraith? MIP Center Drive Shafts (MIP10145, MIP11116)

    If you are tired of breaking the plastic center drive shafts for the Axial SCX10 or Wraith, MIP made these heavy duty center drive shafts made from Alloy Steel.  These steel drive shafts are almost impossible to break.

    The Axial SCX10 part number is MIP10145 and has a MSRP of $65.00.

    The Axial Wraith part number is MIP11116 and has a MSRP of $75.00.

    Wednesday, July 10, 2013

    Vanquish Product's Axial SCX-10 Front Bumper/CMS Mount (VPS06872)


    Vanquish Products has released a Front Bumper/CMS (Center Mounted Servo) Mount (top picture) for the Axial SCX-10.  The Front Bumper/CMS Mount can be used as a upgrade/replacement bumper for the SCX-10 while keeping the servo in the stock position.  The Front Bumper/CMS Mount is available in two colors: Black (VPS06872) or Silver (VPS06871). 

    To use a servo in the Center Mounted Servo Mount, a few parts are required.  The Currie Rockjock SCX-10 Front Axle (middle picture), the SCX-JK Panhard Bar for the SCX Currie Axle (bottom picture), and a Drag Link (not pictured) are required.  Part numbers for the Currie Rockjoc SCX-10 Front Axle are: Black (VPS06601), Grey (VPS06603), and Silver (VPS6605).  Part numbers for the SCX-JK Panhard Bar are: Black (VPS06851) and Silver (VPS06852). 

    Friday, April 12, 2013

    Affordable 4 Pole Motor and ESC Combo's for Short Course Vehicles from Viper RC



    Viper RC has two affordable 4 pole motors and esc combos for short course vehicles.  The Viper VX4.39 4-Pole 3900kv 540 class brushless motor 3.17mm shaft with Copperhead ESC (part# 6VSVX43901) is designed for 2wd and 4wd short course vehicles under 6 pounds.  The Viper
    VX4R.45 4-Pole 4500kv 550 class brushless motor 5.00mm shaft with Copperhead-R ESC (part#6VSVX4R451) is designed for 4wd short course vehicles over 6 pounds.

    Thursday, April 4, 2013

    Looking for a New 4 Wheel Drive Short Course Truck? How about the Tekno SCT410 Kit (TKR5500)

    Tekno RC has released there SCT410 (part# TKR5500) 4 wheel drive short course truck.  The truck is based off of their class leading EB48 1/8th scale electric buggy.  The SCT410 uses the chassis layout learned from the EB48 to strategically place the battery, motor, center differential, and the other electronics to make the best handling truck possible.  The SCT410 is a kit and requires all electronics (radio, battery, servo, and charger), wheels, tires, and body.

    Wednesday, March 20, 2013

    Upgrade Parts for the Vaterra Twin Hammers from Vanquish Products


    Vanquish Products has new parts for the Vaterra Twin Hammers.  Pictured is the Titanium Rear Upper Links (part# VPS06801).  The new upper links adds durability over the stock parts. 

    Thursday, March 7, 2013

    2013 Griffin King of Hammers

    King of Hammers is one of the most exciting off-road races in the world.  Men and women from across the country and all over the world come to Johnson Valley in San Bernardino County in California to compete in a grueling race thru the desert.  Axial Racing came out to support their partners and provide R/C demonstrations to spectators.

    Walking thru the rows of exhibitors with trucks going by.  It's like the Wild West.

     Axial's off-road course attracted spectators all day.  Robby Gordon and his son were having fun driving the Jeep Wrangler.




    Rigid Industries LED were the most popular light source for competitors.




    No such thing as too much light.

    Wednesday, February 27, 2013

    Now a Viper R/C Distributor

     
    We are now a Viper R/C distributor.  We will be carrying there full line ESC's and motors for 1/10th scale, short course and 1/8th scale vehicles.

    Wednesday, February 20, 2013

    New Vanquish Products KMC Enduro 2.2 Wheels


    Vanquish has released new officially licenced KMC Enduro 2.2 Wheels.  The wheels are available in two colors: Black (VPS06791) and Silver (VPS06792).

  • Officially Licensed KMC ENDURO 2.2 Bead lock Wheel By Vanquish Products
  • Precision CNC Machined from Domestic high grade solid billet aluminum
  • Based on our popular OMF clamp ring bead lock mounting system,
  • These are a 1.2 wide wheel compared to the regular 1.0 wide SSZ.
  • Exact as possible scale replica of the full size KMC ENDURO
  • Laser engraved KMC logo on wheel face
  • Package includes the following.
  • 2ea. KMC ENDURO 2.2 RC Bead lock Wheels.
  • 2ea. Aluminum rear bead lock rings.
  • 2ea. Aluminum Internal clamping ring.
  • 2ea. outside Black Beadlock ring
  • 1ea. Official KMC 24pc precut scale sticker kit
  • 74 pcs 1-64 SHCS
  • 21 pcs 4-40 SHCS
  • SLW Hubs are not included.
  • Thursday, February 14, 2013

    New STRC Universal Driveshafts for Traxxas Stampede/Rustler/Monster Jam

    STRC has just released Heat Treated Steel universal driveshaft set for Stampede/Rustler/Monster Jams (ST1953X-L).



    The Stampede/Rustler/Monster Jam Universals carries the same design features as the popular Slash 2wd universal kits:  large diameter universal driveshaft bone for more durability against the power of today's Lipo battery/Brushless motor combo, strong carbon steel universal for the axles that features two sets of pin holes, carbon steel joints and joint pins and also carbon steel diff outdrives.  These are an excellent upgrade for your Monster Jam/Stampede or Rustler trucks. 

    Wednesday, February 13, 2013

    New STRC 17mm Wheel Hex Adapter for Traxxas Slash 4x4

    STRC has new 17mm Wheel Hex Adapter (Part#ST1654-17) for the Traxxas Slash 4x4, Stampede 4x4, and Rally car.  The 17mm Wheel Hexes are available in four colors: Blue, Gun Metal, Red, and Silver.   
    Having this adapter allows people to put on high traction 1/8th scale buggy tires on the Slash 4x4 or Stampede 4x4, or put on GT-8 Slicks/Rally tires on your new Traxxas Rally with the 17mm hex adapter conversion kit.  Features a simple single nut hold-down setup at each axle, these 17mm hex adapter opens up a huge range of tire selection and styles for the Traxxas vehicle. 

    Friday, February 8, 2013

    New STRC Front King-Pins for Traxxas Cars

    STRC has released new CNC Machined Heat Treated, Carbon Steel front King-pins (1 pair) for the Slash 2wd/Rustler/Stampede/Monster Jams (ST3640-FK).
     
    Made of the same heat treated carbon steel as the popular ST3640 series hinge-pin kits, these front king-pins has been a popular request by Slash owners since our hinge-pin kits release.  Heat treated carbon steel make these king-pins much stronger and durable over the stock pieces while the nickel plating makes it smooth and identical in looks as the stock units for spec racing.  The King-Pins are sold in pairs.

    Thursday, February 7, 2013

    Vanquish Products has New LED Lights and Light Bar Mounts



    Vanquish Products has new LED Light Bar Sets.  They are available in 3 lengths and 2 different colors.  Part numbers are: 6" Black (VPS06751), 6" Silver (VPS06752), 5" Black (VPS06753), 5" Silver (VPS06754), 4" Black (VPS06755), and 4" Silver (VPS06756).

  • Vanquish Products Aluminum housing LED light bar.
  • Ultra scale low profile with real extruded heat sink fins.
  • Officially Licensed by the LED light bar gods RIGID INDUSTRIES
  • Operates on 11.1 volts
  • Comes partially assembled
  • Includes universal L bracket mount shown.
  • Includes basic wiring diagram by Harley Designs
  • Overall width Dimensions are as follows
  • 6 inch bar is 6.6 inches wide
  • 5 inch bar is 5.6 inches wide
  • 4 inch bar is 4.6 inches wide



  • Vanquish also has a new Light Bar Mount for the new LED Lights.  They are available in Black (VPS06780) and Silver (VPS06781).

  • Vanquish Products 3D machined aluminum LED Light mount.
  • Ultra scale low profile with real simulated welding.
  • Officially Licensed by POISON SPYDER CUSTOMS
  • Designed to specifically fit AXIAL SCX JEEP JK