Tuesday, March 31, 2009
AX30525 MSRP $75.00
Monday, March 30, 2009
R01610 MSRP $25.00
Monday, March 23, 2009
Here is the Tekno Rc V3 Brushless Conversion Kit available for the Associated RC8/RC8T/SC8, Losi 8B/8T, Hot Bodies D8, Jammin' X2-CRT, and Mugan MBX5-T. The conversion kits come in two different models depending on which brushless motors people are using. One kit is for the Tekno/Neu/Castle Creations/Hacker motors and the other kit is for the Medusa/Novak/Feigao motors.
Every conversion kit comes with a 4mm 7075 T6 CNC hard anodized chassis. This eliminates having to drill your current chassis unlike other conversion kits. The chassis is also recessed to lower the CG, especially where the battery sits. The batteries in this kit sit lower than any other conversion kit on the market today.
The kit is designed to have mechanical braking by using a servo. The advantage of using a servo for braking is a cooler esc and motor and you can also adjust the front and rear brake bias. But it may require a three channel radio with mixing to be able to use the mechanical brakes depending on the setup.
The kit also comes with an Elektri-Clutch system to tune the power delivery. The clutch works just like the gas clutches. The hardened steel clutchbells will last a long time because the motor is disengaged from the drivetrain while off power. But for those who prefer direct drive, the kit is compatible with long shank 5mm bore mod 1 pinions as well.
The kits range in price retailing from $109.99 to $129.99 depending on the model of the conversion kit. This is a very good price considering you get a brand new 7075 T6 CNC chassis and all the hardware needed to convert a gas 1/8th scale to an electric buggy or truggy except for electronics.
Friday, March 20, 2009
TKR1014 MSRP $39.99
Thursday, March 19, 2009
TKR1013 MSRP $24.99
Monday, March 16, 2009
Friday, March 13, 2009
HBZ6413W MSRP $59.95 - Web
Wednesday, March 11, 2009
STA30486 MSRP $16.99 - Optional Front 4 link plate
Monday, March 9, 2009
AX90007 Street Price $259.99
Wednesday, March 4, 2009
STRC3727 MSRP $10.99
Tuesday, March 3, 2009
This is the Robitronic Lap Counting System (part#RS160). The lap counting system comes with software for a computer, pc interface module, receiver module cable, pc interface serial cable, three transponders, and four receivers. The system uses inferred lights to communicate from the transponders to the receivers. Each transponder (part#RS163) has a unique number and they are very small (12mm x 16mm x 7mm), lightweight (3 grams) and more can be purchased additionally if needed. Each receiver (part#RS164) can cover up to about 1 foot width of track space. With the purchase of additional receivers, the system could support a track that is 12 feet wide.
The only thing needed for the lap counting system is a bridge for the receivers. The bridge can be made out of pvc, but can be made out of other materials (wood), and needs to be suspended 2 to 3 feet above the track.
The Robitronic Lap Counting System is very inexpensive compared to others (AMB). The street price is about $369.99 for the system.
RS160 Street Price $369.99 - Lap Counting System
RS163 MSRP $55.00 - Transponder
RS164 MSRP $46.00 - Receiver
Monday, March 2, 2009
The STA80004 are a direct replacement from the kits AX80004 part but in aluminum. If people have aftermarket rims with thick bead locks or rims that have a narrower offset than the stock 8 hole rim, they should use the STA80004.
Both the STA80003 and the STA80004 come in a variety of colors. They come in black, blue, green, orange, red, and silver.
STA80003 - MSRP $25.99
STA80004 - MSRP $25.99